New generation jet engines are subject to severe reduced fuel consumption requirements. This usually leads to thin components in which damage issues such as thermomechanical fatigue, creep and crack propagation can be quite important. The combination of stresses due to centrifugal loads and thermal stresses usually leads to mixed-mode loading. Consequently, a suitable crack propagation tool must be able to predict mixed-mode crack propagation of arbitrarily curved cracks in three-dimensional space. To tackle this problem a procedure has been developed based on a combined FEM (Finite Element Method) - DBEM (Dual Boundary Element Method) approach. Starting from a three-dimensional FEM mesh for the uncracked structure a subdomain is identified, in which crack initiation and propagation are simulated by DBEM. Such subdomain is extracted from the FEM domain and imported, together with its boundary conditions (calculated by a previous thermal-stress FEM analysis), in a DBEM environment, where a linear elastic crack growth calculation is performed. Once the crack propagation direction is determined a new crack increment can be calculated and for the new crack front the procedure can be repeated until failure. The proposed procedure allows to also consider the spectrum effects and the creep effects: both conditions relieve residual stresses that the crack encounters during its propagation. The procedure has been tested on a gas turbine vane, getting sound results, and can be made fully automatic, thanks to in house made routines needed to facilitate the data exchange between the two adopted codes.

Crack propagation calculations in aircraft engines by coupled FEM-DBEM approach

CITARELLA, Roberto Guglielmo;LEPORE, MARCELLO ANTONIO;PERRELLA, MICHELE
2012-01-01

Abstract

New generation jet engines are subject to severe reduced fuel consumption requirements. This usually leads to thin components in which damage issues such as thermomechanical fatigue, creep and crack propagation can be quite important. The combination of stresses due to centrifugal loads and thermal stresses usually leads to mixed-mode loading. Consequently, a suitable crack propagation tool must be able to predict mixed-mode crack propagation of arbitrarily curved cracks in three-dimensional space. To tackle this problem a procedure has been developed based on a combined FEM (Finite Element Method) - DBEM (Dual Boundary Element Method) approach. Starting from a three-dimensional FEM mesh for the uncracked structure a subdomain is identified, in which crack initiation and propagation are simulated by DBEM. Such subdomain is extracted from the FEM domain and imported, together with its boundary conditions (calculated by a previous thermal-stress FEM analysis), in a DBEM environment, where a linear elastic crack growth calculation is performed. Once the crack propagation direction is determined a new crack increment can be calculated and for the new crack front the procedure can be repeated until failure. The proposed procedure allows to also consider the spectrum effects and the creep effects: both conditions relieve residual stresses that the crack encounters during its propagation. The procedure has been tested on a gas turbine vane, getting sound results, and can be made fully automatic, thanks to in house made routines needed to facilitate the data exchange between the two adopted codes.
2012
9788895940441
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11386/3878275
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact