Two techniques to effectively compensate known positioning errors in a plane-polar near-field–far-field (NF–FF) transformation, using a minimum number of NF data and adopting an oblate ellipsoid to shape the considered antenna, are proposed and validated through experimental proofs. The former makes use of the singular value decomposition method to recover the voltage samples which would be acquired by the probe at the points fixed by the non-redundant sampling representation from the collected positioning error affected ones, whereas the latter employs an iterative scheme. The NF data required by the classical NF–FF transformation with plane-rectangular scanning are then efficiently evaluated via a two-dimensional optimal sampling interpolation formula. The effectiveness of the proposed techniques is assessed by experimental tests performed at the Antenna Characterisation Lab of the University of Salerno.

Two efficient procedures to correct the positioning errors in the plane-polar scanning

D'AGOSTINO, Francesco;FERRARA, Flaminio;GENNARELLI, Claudio;GUERRIERO, ROCCO;MIGLIOZZI, MASSIMO
2016-01-01

Abstract

Two techniques to effectively compensate known positioning errors in a plane-polar near-field–far-field (NF–FF) transformation, using a minimum number of NF data and adopting an oblate ellipsoid to shape the considered antenna, are proposed and validated through experimental proofs. The former makes use of the singular value decomposition method to recover the voltage samples which would be acquired by the probe at the points fixed by the non-redundant sampling representation from the collected positioning error affected ones, whereas the latter employs an iterative scheme. The NF data required by the classical NF–FF transformation with plane-rectangular scanning are then efficiently evaluated via a two-dimensional optimal sampling interpolation formula. The effectiveness of the proposed techniques is assessed by experimental tests performed at the Antenna Characterisation Lab of the University of Salerno.
File in questo prodotto:
File Dimensione Formato  
D'Agostino Francesco 1-156 DEFINITIVO.pdf

non disponibili

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: NON PUBBLICO - Accesso privato/ristretto
Dimensione 576.87 kB
Formato Adobe PDF
576.87 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
156 D'Agostino Post-print.pdf

accesso aperto

Descrizione: The Institution of Engineering and Technology 2016; Link editore: https://ietresearch.onlinelibrary.wiley.com/doi/epdf/10.1049/iet-map.2016.0103
Tipologia: Documento in Post-print (versione successiva alla peer review e accettata per la pubblicazione)
Licenza: Creative commons
Dimensione 2.5 MB
Formato Adobe PDF
2.5 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11386/4674359
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 21
  • ???jsp.display-item.citation.isi??? 13
social impact