The extraordinary growing demand for environmentally friendly materials leads to an increasing attention on the use of biopolymers. The Poly-lactic acid (PLA) is one of the most promising biopolymers, with very interesting physical and mechanical properties. However, the low rate of crystallization of the PLA compared to other semi-crystalline polymers limits its use in technical applications. In this study, the effect of the application of a system able to rapidly change the temperature of the cavity surface on the final crystallinity of Poly-lactic acid micro-parts was studied. The technique adopted is based on the use of very thin heating elements, thermocouples and insulation layers that can be attached near the surface of the cavity allowing precise and local control of the temperature during each stage of the molding cycle. The system was adopted to increase the temperature of the cavity up to 160°C during the filling stage to permit the filling of a cavity with a thickness of 0.2 mm and an aspect ratio equal to 50. After the filling, the system allowed the application of rapid temperature variations locally along with the sample. Different thermal histories were applied to tune the morphology of the parts. Calorimetric analyses permitted to understand the crystallization behavior of the processed material and determine the final crystallinity in the produced samples.

Effects of rapid cavity temperature variations on the crystallinity of PLA

De Meo A.;Pantani R.
2020-01-01

Abstract

The extraordinary growing demand for environmentally friendly materials leads to an increasing attention on the use of biopolymers. The Poly-lactic acid (PLA) is one of the most promising biopolymers, with very interesting physical and mechanical properties. However, the low rate of crystallization of the PLA compared to other semi-crystalline polymers limits its use in technical applications. In this study, the effect of the application of a system able to rapidly change the temperature of the cavity surface on the final crystallinity of Poly-lactic acid micro-parts was studied. The technique adopted is based on the use of very thin heating elements, thermocouples and insulation layers that can be attached near the surface of the cavity allowing precise and local control of the temperature during each stage of the molding cycle. The system was adopted to increase the temperature of the cavity up to 160°C during the filling stage to permit the filling of a cavity with a thickness of 0.2 mm and an aspect ratio equal to 50. After the filling, the system allowed the application of rapid temperature variations locally along with the sample. Different thermal histories were applied to tune the morphology of the parts. Calorimetric analyses permitted to understand the crystallization behavior of the processed material and determine the final crystallinity in the produced samples.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11386/4764202
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? 0
social impact