In this paper the first results of a comprehensive numerical investigation regarding the flexural–torsional response of pultruded slender beams is presented. The goal of the research is to propose GFRP standard cross-sections of such proportions and shapes that would possess improved strength, stability and deformational characteristics compared to the corresponding existing sections whose proportions are generally based on standard steel sections. As GFRP sections are thin-walled but are significantly less stiff than similar steel sections, the study focuses on enhancing their appropriate stiffness and buckling strength. The novel and efficient numerical model used in this investigation was developed by the writers and can be used to trace the complete pre-buckling geometrically nonlinear response of any GFRP or steel thin-walled member with open or closed cross-section. The bucking load is computed by the asymptotic value of the load-displacement curve. It is demonstrated that due to their unsuitable proportions, available standard GFRP sections do not have adequate stiffness and buckling strength. Consequently, relative to T-cross section only recommendations are made for new sectional proportions and modified shape. The superiority of the proposed section is quantified by an efficiency factor, defined in terms of ratio of strength gain to material volume increase.
LATERAL BUCKLING PROBLEM: MODIFICATIONS OF STANDARD GFRP SECTIONS SHAPE AND PROPORTIONS
ASCIONE, FRANCESCO;LAMBERTI, MARCO;
2015-01-01
Abstract
In this paper the first results of a comprehensive numerical investigation regarding the flexural–torsional response of pultruded slender beams is presented. The goal of the research is to propose GFRP standard cross-sections of such proportions and shapes that would possess improved strength, stability and deformational characteristics compared to the corresponding existing sections whose proportions are generally based on standard steel sections. As GFRP sections are thin-walled but are significantly less stiff than similar steel sections, the study focuses on enhancing their appropriate stiffness and buckling strength. The novel and efficient numerical model used in this investigation was developed by the writers and can be used to trace the complete pre-buckling geometrically nonlinear response of any GFRP or steel thin-walled member with open or closed cross-section. The bucking load is computed by the asymptotic value of the load-displacement curve. It is demonstrated that due to their unsuitable proportions, available standard GFRP sections do not have adequate stiffness and buckling strength. Consequently, relative to T-cross section only recommendations are made for new sectional proportions and modified shape. The superiority of the proposed section is quantified by an efficiency factor, defined in terms of ratio of strength gain to material volume increase.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.