This study develops simple analytical tools, within the framework of the component method approach, to enhance the design and modelling of welded connections between Square Hollow Section columns and passing-through beams. This joint configuration represents a practical alternative to conventional details where beams are welded directly to the external faces of hollow section columns. The use of this nodal solution has recently become more popular thanks to the 3D Laser Cutting Technology; however, the absence of specific design formulations for evaluating its strength and stiffness currently limits its practical application. To address this gap, this work investigates the flexural strength and initial stiffness of this connection typology. In this regard, an experimental campaign was conducted at the University of Salerno on four beam-to-column sub-assemblies, covering both external and passing-through beam configurations including cyclic and monotonic tests. Finite element models of the tested specimens were developed and validated against the experimental results. The validated models were then used to conduct a parametric study of 30 different geometric configurations of connections with passing-through beams. Based on the component method, analytical formulations for strength and stiffness were derived and checked against the parametric study results. The proposed equations demonstrate a satisfactory predictive accuracy and represent a further step toward establishing design guidance for the use of these connections in practice.

Component-based model for flexural behaviour of single-sided SHS column and through-beam joints

Latour M.;Ajwad A.;Di Benedetto S.;Rizzano G.
2026

Abstract

This study develops simple analytical tools, within the framework of the component method approach, to enhance the design and modelling of welded connections between Square Hollow Section columns and passing-through beams. This joint configuration represents a practical alternative to conventional details where beams are welded directly to the external faces of hollow section columns. The use of this nodal solution has recently become more popular thanks to the 3D Laser Cutting Technology; however, the absence of specific design formulations for evaluating its strength and stiffness currently limits its practical application. To address this gap, this work investigates the flexural strength and initial stiffness of this connection typology. In this regard, an experimental campaign was conducted at the University of Salerno on four beam-to-column sub-assemblies, covering both external and passing-through beam configurations including cyclic and monotonic tests. Finite element models of the tested specimens were developed and validated against the experimental results. The validated models were then used to conduct a parametric study of 30 different geometric configurations of connections with passing-through beams. Based on the component method, analytical formulations for strength and stiffness were derived and checked against the parametric study results. The proposed equations demonstrate a satisfactory predictive accuracy and represent a further step toward establishing design guidance for the use of these connections in practice.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11386/4968828
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? 1
social impact