Agarose-based gels were produced either by freeze-drying or by supercritical drying for crystal violet (CV) removal from aqueous solutions. The microporosity features of these structures highly affected the final adsorption properties. In particular, agarose cryogels were characterized by a macroporous and irregular morphology, with a low value of specific surface area (11 ± 6 m2/g) with respect to the nanoporous agarose aerogels (154 ± 12 m2/g). To test the efficacy of CV removal, two different types of adsorption test were performed, i.e., batch-mode and multi-step mode. Operating in the multi-step mode, the adsorption performance was larger both for cryogels and aerogels, since this adsorption method allowed a more effective contact between CV and agarose adsorbent. In particular, using 300 mg of cryogels, a removal efficiency of 74% was achieved; using the same quantity of aerogels, 96% of removal efficiency was reached after eight steps of adsorption. Desorption of CV from aerogels was realized using ascorbic acid and, after regeneration, 93% of removal efficiency was preserved, even after three cycles in multi-step filtration mode.
Different Drying Techniques Can Affect the Adsorption Properties of Agarose-Based Gels for Crystal Violet Removal
Guastaferro M.;Baldino L.
;Cardea S.
;Reverchon E.
2023-01-01
Abstract
Agarose-based gels were produced either by freeze-drying or by supercritical drying for crystal violet (CV) removal from aqueous solutions. The microporosity features of these structures highly affected the final adsorption properties. In particular, agarose cryogels were characterized by a macroporous and irregular morphology, with a low value of specific surface area (11 ± 6 m2/g) with respect to the nanoporous agarose aerogels (154 ± 12 m2/g). To test the efficacy of CV removal, two different types of adsorption test were performed, i.e., batch-mode and multi-step mode. Operating in the multi-step mode, the adsorption performance was larger both for cryogels and aerogels, since this adsorption method allowed a more effective contact between CV and agarose adsorbent. In particular, using 300 mg of cryogels, a removal efficiency of 74% was achieved; using the same quantity of aerogels, 96% of removal efficiency was reached after eight steps of adsorption. Desorption of CV from aerogels was realized using ascorbic acid and, after regeneration, 93% of removal efficiency was preserved, even after three cycles in multi-step filtration mode.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
