Injection molding of polymer parts at a micro-scale is successfully applied in the fabrication of electronics and biomedical devices where high geometrical accuracy is required. Microinjection molding is more challenging than conventional injection molding due to the necessity to account for the presence of air in the cavity, which slows down the process, and a strong flow field that may induce premature solidification of semi -crystalline polymers. The process modeling and simulation are crucial steps toward predicting all the final parts' properties. For this reason, a multiphysics approach was used to model microinjection molding under different mold cycle temperatures. A well-characterized polypropylene was selected for this purpose. A model for tracking the polymer-air interface during the filling was adopted to account for air's effect in the micro-cavity. Additionally, a model accounting for the effect of crystallization on viscosity was implemented. Models describing the evolution of morphology into fibrils were previously proposed in steady-state conditions. In this work, a model for describing the crystallization into fibrils was proposed and adapted for the first time to the transient conditions of microinjection molding. The aim was the prediction of the final morphology developed during the process. The morphology evolution toward fibrillar structure is consistent with those observed experimentally; in particular, the fibrillar layer thickness decreased with the increase of the mold temperature.(c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

Morphology predictions in molded parts: a multiphysics approach

Marra, F;Liparoti, S
;
Speranza, V;Pantani, R
2022-01-01

Abstract

Injection molding of polymer parts at a micro-scale is successfully applied in the fabrication of electronics and biomedical devices where high geometrical accuracy is required. Microinjection molding is more challenging than conventional injection molding due to the necessity to account for the presence of air in the cavity, which slows down the process, and a strong flow field that may induce premature solidification of semi -crystalline polymers. The process modeling and simulation are crucial steps toward predicting all the final parts' properties. For this reason, a multiphysics approach was used to model microinjection molding under different mold cycle temperatures. A well-characterized polypropylene was selected for this purpose. A model for tracking the polymer-air interface during the filling was adopted to account for air's effect in the micro-cavity. Additionally, a model accounting for the effect of crystallization on viscosity was implemented. Models describing the evolution of morphology into fibrils were previously proposed in steady-state conditions. In this work, a model for describing the crystallization into fibrils was proposed and adapted for the first time to the transient conditions of microinjection molding. The aim was the prediction of the final morphology developed during the process. The morphology evolution toward fibrillar structure is consistent with those observed experimentally; in particular, the fibrillar layer thickness decreased with the increase of the mold temperature.(c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11386/4799253
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 5
social impact