Catalogo Prodotti Ricerca

Catalogo Prodotti Ricerca: [111972] Home page macrotipologia

Sfoglia

1 Contributo su Rivista 58222
- 1.1 Articoli su Rivista 9342
- 1.1.1 Articolo su rivista con DOI 13902
- 1.1.2 Articolo su rivista con ISSN 31567
- 1.2 Recensione 1512
- 1.3 Scheda bibliografica 165
- 1.4 Nota a sentenza 457
- 1.5 Abstract su Rivista 1110
- 1.6 Traduzione in Rivista 168

2 Contributo in volume (exArticolo su libro) 24368
- 2.1 Contributo in volume 3698
- 2.1.1 Articolo su libro con DOI 579
- 2.1.2 Articolo su libro con ISBN 17159
- 2.1.3 Articolo su libro con ISSN 871
- 2.2 Prefazione/Postfazione 566
- 2.3 Breve introduzione 170
- 2.4 Voce Dizionario/Enciclopedia 771
- 2.5 Traduzione in Volume 164
- 2.6 Recensione in volume 25
- 2.7 Schede di Catalogo, repertorio o corpus 365

3 Libro (ex Monografia) 4423
- 3.1 Monografia,Trattato scientifico 490
- 3.1.1 Monografia con DOI 35
- 3.1.2 Monografia con ISBN 3589
- 3.2 Concordanza 1
- 3.3 Indice 6
- 3.4 Bibliografia 19
- 3.5 Edizione critica di testi/Edizione critica di scavo 95
- 3.6 Pubblicazione di fonti inedite 13
- 3.7 Commento scientifico 24
- 3.8 Traduzione di libro 151

4 Contributo in Atti convegno(ex Proceedings) 19626
- 4.1 Contributi in Atti di convegno 5052
- 4.1.1 Proceedings con DOI 1771
- 4.1.2 Proceedings con ISBN 10353
- 4.2 Abstract 1963
- 4.3 Poster 490

5 Curatela 2415
- 5.1 Curatela con DOI 97
- 5.2 Curatela con ISBN 1996
- 5.3 Curatela con ISSN 322

6 Brevetto 331
- 6.1 Brevetto 331

7 Altro 2588
- 7.01 Composizione 6
- 7.02 Disegno 5
- 7.03 Design 0
- 7.04 Performance 13
- 7.05 Esposizione 35
- 7.06 Mostra 16
- 7.07 Manufatto 0
- 7.08 Prototipo d'arte,relativi progetti 1
- 7.09 Cartografia 5
- 7.10 Banca dati 27
- 7.11 Software 25
- 7.12 Altro 2450
- 7.13 Progetto architettonico 5

Prodotti recenti

«Wir haben jetzt die Demokratie, das ist kompliziert genug». Zur Krise demokratischer Systeme und Auflösung des Politischen in «Munin oder Chaos im Kopf» von Monika Maron

The effect of manufacturing defects on the high-cycle fatigue of electron-beam-welded Ti-6Al-4V titanium alloy: experimental and numerical analysis

Purpose Electron-beam welding has been widely used in industry to join different titanium alloys (Ti-6Al-4V) components. During welding production defects, such as porosity, lack of penetration or thinning are often observed. High-cycle fatigue (HCF) tests have been performed on welded specimens to understand the effect of weld defects on fatigue capabilities. The fatigue life of different types of “defective” welds has been compared against a non-welded reference specimen. Design/methodo...

Finite element modeling of superplastic forming of friction stir processed AZ31B mg alloy

Superplastic forming (SPF) is considered to be a near net shape manufacturing technique, mainly adopted to realize aircraft and automotive parts, which requires relatively high tooling and assembly costs. Furthermore the tuning of the process is a non trivial operation since very limited reliable models have been developed to predict the complex geometries obtained through SPF. In such context several researches, based on finite element method (FEM,) have been conducted on the numerical optim...

Mechanical properties optimization of Cr3C2-NiCr coatings produced by compact plasma spray process

Chromium carbides are widely used as functional coatings on steel structures in high-end applications, from energy to marine and aerospace sectors thanks to their corrosion and wear resistance at elevated temperatures. In the present work, a low-power compact plasma spray (CPS) equipment was used to deposit Cr3C2-based cermet coatings on carbon steel substrate. Design of experiment was applied to select and optimize the spraying parameters, namely current, stand-off distance, scanning speed, ...

Peck drilling of CFRP/titanium stacks: effect of tool wear on hole dimensional and geometrical accuracy

The effect of tool wear on dimensional and geometrical accuracy of holes machined by peck drilling in carbon fibre reinforced plastic (CRFP) and titanium (Ti) stacks is studied. Coated and uncoated tungsten carbide drills of both fine and ultra-fine microstructures are employed to assess the importance of grain size and coating on hole accuracy. Hole profiles show two maxima: one at the hole entry and the other at the CFRP/Ti interface. Hole cylindricity as function of tool wear shows a minim...

Scopri

Accesso al fulltext

no fulltext110535
open955
reserved261
partially open216
embargoed1
mixed1

UniSa - IRIS Institutional Research Information System